Mold remover from unpainted and painted exterior surfaces before painting - Homeenpoisto TIKKURILA

Homeenpoisto TIKKURILA Is A Mold Remover From Unpainted and Painted Exterior Surfaces Before Painting

Tikkurila Homeenpoisto plaster effectively removes mold from wooden, plastered and concrete facades. It removes the blue well from the wood, provided it has not had time to penetrate too deeply. They can also process fiber cement roofs and concrete shingles.

Tikkurila Homeenpoisto is diluted with water in a ratio of 1: 3 and applied to moldy facades with a sponge or soft brush. On large areas, it is more convenient to apply it with a garden sprayer from the bottom up - this will avoid the appearance of streaks.

If the surface is very moldy, you can keep the solution longer and use a brush. After the treatment, the facade is thoroughly washed with clean water from top to bottom, for example, with a sprayer. The surface cleaned with Tikkurila Homeenpoisto solution is smooth and ready for painting.

TYPE OF PRODUCT: Water-based

APPLICATION: brush, sponge, spray

STORAGE: In a well-closed container at a temperature not lower than 5 ° C, protected from moisture, heat and direct sunlight. After opening, use throughout the season. In incomplete containers, product properties may change.

CONSUMPTION: Depending on the degree of surface contamination.