THE CERTIFIED DISTRIBUTOR
in the BALKANS
Direct shipping
from Siberia

WORK TIME
from 8:30 to 16:30
Monday - Friday
Saturday 9:00 to 13:00

CALL BACK
Send us a phone number to contact you

Request call

Protective Wax for Saunas from Tikkurila - Supi Sauna Wax 0,9l

TIKKURILA
1 800 RSD
15
(Including tax)
+

PROMOTION! Place an order through the site and get additional 3% DISCOUNT!

Kupite Protective Wax for Saunas from Tikkurila - Supi Sauna Wax 0,9l u internet prodavnici ArixShop.Com d.o.o "M.ARIS BEST" - po povoljnoj cijeni. Protective Wax for Saunas from Tikkurila - Supi Sauna Wax 0,9l: specifikacije, recenzije, opis, slike proizvoda. Veliki izbor proizvoda!

Protective Wax for Saunas - Supi Sauna Wax 0,9l

The protective coating contains natural wax for interior wooden surfaces in saunas. Supi Sauna Wax is absorbed into the wood and creates a surface resistant to moisture and dirt

RECOMMENDED USE

Sauna benches, wall panels and ceilings, doors and window frames

Coverage:

10 - 13 m2 / l depending on the type of wood:

Ribbed surface - 10 m2 / l

Smooth surface - 13 m2 / l

Color palette

Finished shades of black, white and gray. Gloss level - Undefined

Packaging of cans: 0.225 l, 0.9 l, finished shades 1/3 l and 1 l

Method of application

Foam brush, sponge or brush with artificial bristles

Drying time at 23 ̊C and 50% relative humidity: Dry to dust in 30 min - 1h. Ready to use after 24h.

Solids content: about 24%

Specific weight: 1.0 kg / l, ISO 2811

APPLICATION DETAILS

Conditions for application: The surface to be treated must be dry, air temperature at least + 5 ° C and relative humidity below 80%.

Preparation: New clean wooden surfaces: Clean all surfaces from dirt and dust. Moisten slightly with water spray, leave to dry and grind loose wood fibers. Remove sanding dust.

Old dirty and pre-treated wooden surfaces with e.g. Soup Sauna Finish: Wash the surfaces with Supi Saunapes cleaner according to the instructions, rinse and leave to dry. Sand and remove sanding dust. If traces of the old surface remain after the wax treatment, the final look will have more shine than untreated wood. Supi Sauna Wax is not recommended for use on oil-coated surfaces (eg with Supi Bench Protection), if the oil does not wear out. Protect floors well before use, as Supi Sauna Wax is easily absorbed into tile joints.

Wash the surfaces with Supi Saunapes cleaner according to the instructions, rinse and leave to dry. Sand and remove sanding dust. If traces of the old surface remain after the wax treatment, the final look will have more shine than untreated wood. Supi Sauna Wax is not recommended for use on oil-coated surfaces (eg with Supi Bench Protection), if the oil does not wear out. Protect floors well before use, as Supi Sauna Wax is easily absorbed into tile joints.

Coating:

Stir Supi Sauna Wax well, from time to time as well as during use. Apply one layer of wax, do not use more wax than the wood can absorb. Since wax is very liquid, it is the most suitable application using a foam brush or sponge. The surface remains greasy if too much wax is applied. Do a rehearsal with the toned Supi Sauna Wax on the hidden part to make sure the shade is appropriate. The final shade of the surface depends on the type of wood. Treat smaller areas at once to avoid reclamation, and large panel areas 1-2 panels at a time to achieve a uniform appearance. Heat and ventilate saunas before use. Heat-treated wooden surfaces are recommended to be treated with Supi Sauna Wax tinted in shade TVT 318R.

Cleaning tools

Wash the tool with water or Tikkurila Pensselipes (Cleanser tools).

Maintenance instructions

Cleaning at least one month after application. Surface cleaning with Supi Saunapes cleaner (1-2 dl cleaner in 5 liters of water).

EU VOC 2004/42 / EC limit value: (cat A / f) 130 g / l (2010)

SAFETY AND HEALTH CLASSIFICATIONS according to Regulation (EC) No. 1272/2008

The product is not classified as dangerous.

ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL

Empty cans should be recycled or disposed of in accordance with local regulations regulations. Liquid waste should be disposed of in accordance with local regulations.

Get prompt advice from ArixShop specialists on any issue

SHIPPING IN SERBIA

The cost and delivery time of your order are estimated online on the checkout.
The estimation is done according to the goods weight and point of destination.
We deliver orders in Serbia and Montenegro.

Contact us for a detailed discussion of your order and delivery methods.

 

Shipping methods

Express courier services

  • Delivery of goods in accordance with the principle of "door to door", "today for tomorrow" on the territory of the Republic of Serbia.
  • Receipt of goods for delivery every working day from a given address.
  • In case of unsuccessful delivery, we leave a notice of arrival of the goods with the re-delivery of the delivery (twice to the specified address).
  • Any undelivered goods are returned after agreement with the sender in case of delivery failure.
  • Identification of legal entities and individuals at the address when issuing goods.
  • Return shipping documentation upon delivery.
  • Provider for the purpose of faster communication and possible complaints of the Service user.
  • We offer waterproof packaging.
  • We receive and deliver on weekdays in all locations in Serbia. On Saturdays, only the delivery of goods.

Pickup

You can also receive your order in one of Customer Pick Up Centers.

List of Pick Up Centers

PAYMENT

Non-cash settlements (invoices). This method is best for organisations. You place an order, print the received invoice, pay it, and contact us to know the order delivery date.
Pay the courier when delivered
Credit card. You can pay your order with a VIsa or Master Visa card when the order is placed in our store or when receiving the goods (This payment option is under construction).